Gorilla Clear Grip, 4 Pack

Gorilla Clear Grip® is a flexible, fast-setting, crystal clear contact adhesive that creates a strong, permanent bond. Gorilla Clear Grip is paintable and waterproof making it great for projects both inside and out! Build, create, repair®!

All surfaces should be clean and free of dirt, grease, and oil. Best if used between 50°F and 90°F. Clear Grip should only be used in a well-ventilated area.

Apply adhesive to each surface to be bonded. To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces.

Press surfaces firmly together. NOTE: Bond forms immediately and can be difficult to reposition.

Cure Time: Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.

Storage Tips: After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.

Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.

Paintable: When fully cured.

NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.